Ghost 2 Immobiliser Problems
Created to guard vehicles from key cloning and hacking The Ghost 2 immobiliser is a discrete device that can be installed without damaging your vehicle. It prevents your vehicle from starting unless you enter the correct sequence of buttons within your vehicle similar to the password you enter on the phone.
Stop/Start
Ghost immobilisers stop vehicles from being stolen by preventing the engine from starting until it is issued the correct PIN code. This is done without altering the vehicle, and is not detected by thieves. The unit is directly connected to the ECU via the CAN databus in order to disable the vehicle. This system is very like the one automobile manufacturers have used in their vehicles for a long time However, thieves can't add a new key or utilize key relay technology to bypass it like they can with factory fitted systems.
Ghost Ghost can be fitted to any car, van, motorhome, caravan or bicycle that has an engine. It's compatible with all popular makes of vehicles. The same system can also be utilized on electric vehicles. It is an excellent alternative to wheel clamps and steering wheel locks.
If the Ghost is activated it will block all buttons in your car and stop the ignition being started without a PIN number. This can be done via the Android or Apple mobile app or by manually entering the code via your key fob. If the wrong code is entered, the app will show an indicator light and the Ghost will not allow the vehicle to be started again. This is a great way to discourage thieves. If the vehicle cannot be started the thieves will be able to move on.
The Ghost is a small, weatherproof device that can be hidden away in the most inaccessible areas of your vehicle. Installation takes between 20 and 30 minutes for each vehicle. It is also easy to remove should you decide to move your vehicle around or return it to valet parking or service. It is a fully TASSA (Tracking and Aftermarket Security Systems Association) insurance approved system that is endorsed by some insurers. It also comes with an emergency security feature that is secured by Pin Code Override, and a Service/Valet mode which can be activated by pressing a button on the app or by using your key fob.
Disarm
Ghost immobilisers like mechanical anti-theft devices that can be removed, are hidden within the car. Even if they were to be found in the car, thieves wouldn't be able start the car. They are virtually impossible to hack or bypass. This is because a ghost immobiliser blocks key blocking, signal jamming, and device spoofing - techniques that are commonly used by thieves to gain access to vehicles with standard immobilisers.
The immobiliser sends a code to the ECU. If a wrong code is received the vehicle will not be started as the engine will not start up. Although it is possible to disable the ghost immobiliser by using software, it is time-consuming and difficult. The software can only be installed and used by an authorised installer.
The Ghost immobiliser, a tiny device, is hidden in the vehicle's wiring loom. It is inaccessible to the naked eyes once installed. It won't show up on diagnostic systems, there are no LED indicators and it will not communicate with the engine via the OBD port. It communicates in silence via the CAN data loop.
The system will block the vehicle from starting until it is given a specific PIN code sequence. This code can be entered using buttons on the steering wheel and door panels as well as the the centre console. This is a more secure method to safeguard your car as it doesn't require an additional remote control or key fob.
In addition, Ghost also has a service mode which can be activated using the application on your mobile phone. This allows you to give your keys to someone else to use for valet parking or service without needing to enter an arm-disarm sequence.
If your Ghost is in service mode or not you should not attempt to remove the system on your own because it could affect your engine and cause damage. It is recommended to speak with an TASSA certified installer who will be able to remove the system safely and correctly. Our newest GHOST immobilisers have a specific fingerprint QR sticker hidden in different parts of your vehicle. These are linked to our security register. If the system is removed and later sold on the blackmarket this will allow you to trace the owner of the system.
Anti-Hijack
Ghost Immobiliser 2 has a very useful anti-hijack feature. This system works like a smart key and is among the most secure methods to keep your car safe from thieves. If the ignition switch is switched to on, and the vehicle is stationary for 30 seconds then the Ghost system will stop the engine and turn the hazard lights on. This gives the driver and passengers time to press the security button before the system is reactivated.
Unlike many competitor systems that simply stall the engine when the ignition switch is turned on The Ghost system has a unique controller and timer unit that will close the valve that cuts off fuel if it is activated after an agreed-upon time, even in the event that the ignition is turned on! The delay period must be long enough for the hijacked vehicle owner to drive away and stay a safe distance from the stalled car before the system is reactivated.
The Ghost offers added security that blocks common hacking techniques used to gain access into modern cars like relay attacks and key range extension. This is because the Ghost system communicates silently and doesn't emit any signals that can be detected by a criminal using codes or RF scanning technology.
The Ghost system also features the Service/Valet mode that allows your vehicle to be temporarily started and driven without the requirement of an PIN code. This is a great option when you park your vehicle and only require it to be left for a short time for a few minutes, like to open ghost immobiliser the garage door or put groceries in the boot. The system will exit the service mode according to speed and time or through an easy PIN code input process. This gives you total security that only YOU can drive your vehicle!
Keyless Entry
With the growing trend in contactless car theft, many customers are seeking out additional security options. This is particularly relevant for those who have invested time and money in customizing their car or own expensive cars. Immobilisers with add-ons can be a good method to stop this kind of theft, since they prevent your car from starting until the correct pin code is entered along with your key fob.
Immobilisers are designed to impede the various circuits in a vehicle which include ones that control the starter motor and fuel pump. They also can shut off the car alarm in order to draw attention and scare off any potential thieves.
These devices communicate with the engine control unit (ECU) through the CAN data circuit, and they stop a burglar trying to get around it by installing a brand new ECU or using the key programmer. These immobilisers are installed discreetly and leave no marks in your vehicle. They are also not detected with the latest tools of thieves.
The Ghost immobiliser differs from other systems that require the driver to carry tags or an app. Instead, you can select your personal pin sequence by pressing the pattern on your steering wheel, door panel, and centre console. The pin can be changed as frequently as you'd like, meaning it's as secure as a credit card, and can be even more difficult to hack due to it requiring at least 20 presses.
Ghost also offers the option of a valet/service mode that allows you to disable the system if your car is to be turned over to valet parking or service which allows it to operate within set parameters, like 30mph speed limits, so you don't have to worry about your vehicle being driven in reckless manner. It can be activated with the original key or the corresponding entry code.
This makes it the most efficient and secure aftermarket CAN-based immobiliser on the market, and is insurance approved by Thatcham as an accessory to your vehicle when installed by one of our authorised installers. The Ghost 2 immobiliser is also supplied with six QR fingerprint labels as well as an ISR contact card that contains your unique QR code and an emergency number that is secure which you keep in the wallet/purse of your car.