Why Ghost 2 Immobiliser Reviews Is Fast Becoming The Trendiest Thing Of 2023?

Ghost 2 Immobiliser

Ghost is a wireless security system that protects against key-cloning. It connects to the ECU unit via the CAN data network and is silent and isn't detected by thieves.

It is only disarmed by pressing a certain button sequence (like PIN codes) that you have programmed with the buttons of your car - such as those on the steering wheel or center console.

Protect Your Car from Theft

With car theft increasing and cars being stolen in mere seconds it is essential that every car owner think about the additional security options available to them. Immobilisers are among the most effective and proven ways to keep your vehicle safe. Ghost immobilisers can be an excellent choice since they are small and tucked away in the vehicle's wires. They also don't emit radio frequency signals. This means that they are not traceable and may be fitted without affecting your vehicle's CAN bus.

Unlike other immobilisers that rely on tags, keypad input or a specific sequence of buttons to disable them, our ghost immobiliser near me can only be deactivated with the exact pin code that was set up by us at the time of installation. This unique disarming sequence uses buttons on your steering wheel or doors to stop anyone from driving away your vehicle. This makes it impossible for thieves to copy your key or use jamming/spoofing equipment that could disable standard immobilisers.

Not only will a ghost immobiliser prevent your car from being driven and parked, it also prevents the car from being taken to make parts. This is a growing problem in the UK due to the growing popularity of these type of vehicles. It can happen within one minute. TTW ghost immobilisers can be easily programmed to guard vehicles from such attacks.

Installing our Ghost 2 immobiliser can stop your car from being taken at a service station or even if it is driven into the garage by employees. The Ghost can be set to Service/Valet Mode, which only allows you, the customer to select a unique button combination.

Contact us today if are interested in learning more about our Ghost immobilisers or if you'd like a no-cost estimate. We're here to help you and provide peace of mind knowing your vehicle will be safe for all times.

No Key Fobs or LED Indications to indicate its location.

This car immobiliser that is not detectable integrates with your car's CAN network to safeguard your vehicle from the newest type of car crime. Ghost is different from other CAN-immobilisers made by aftermarket vendors that rely on key fobs or LED indicators to perform the function. Instead, it makes use of the buttons on your vehicle's standard factory controls, such as those on the steering wheel and door panels. This means that a hidden pin code is created which must be entered before the vehicle will start and is completely inaccessible to thieves.

The developers of the CAN-BUS immobiliser have also added extra high-security methods to guard the device from being hacked or bypassed. It also offers CAN-BUS blocking and a physical immobiliser cut meaning that even if your keys are stolen, the criminal will be unable to leave with your joy and pride.

Installing the CAN BUS in your vehicle is a simple and easy procedure that only takes 30 minutes. We will send a member from our team to your location so that they can arrange an appointment and time that is convenient for you. Once your vehicle has been fitted, you will be given a registration code and unique security codes to use on your smartphone and application. This will make it easier to use and gives you complete control over the safety of your vehicle.

The system is compatible with the majority of modern vehicles, however If you own a classic or special-purpose vehicle, please contact us to confirm compatibility. The price for installation and supply of The Ghost Immobiliser is APS449 and your vehicle will be added to the International Security Register if fitted by one of our certified fitters. Do not hesitate to contact our friendly team if you have any questions. We look forward to receiving your call soon.

Easy to Setup and Program

Immobilisers are installed in numerous modern vehicles to stop theft or hot-wiring. Immobilisers are more effective than physical deterrents, such as steering wheel locks and wheel clamps because they are built into the vehicle.

The unit connects directly to the CAN data network in your vehicle and prevents it from running until you enter a unique code. The unit is small and sealed, which means it can be put in any place within your vehicle without any additional wiring. It does not emit radio frequency signals, so it won't be recognized by scanners or code-grabbing equipment.

Ghost uses the buttons on your steering wheel, door panels and centre console of your vehicle to create a customized (like a pin code) disarm sequence that must be entered in order to start your car. The pin code sequence is built around the number of button presses from 4 to 21 and is easily changeable in the event of need. You can even put your vehicle in Service/Valet Mode so that it can still be operated but will not be able to start or drive. This will ensure that your vehicle is safe when you take it in for servicing or valet parking, and make sure that the mechanic isn't able to access your pin code in order to deactivate your system.

You can make use of our app to create temporary pins for your ghost device in the event that you plan to be away from your vehicle for a prolonged period of time, such as an extended work or holiday. You can also enter your pin code manually when you are planning to drive the vehicle.

Our CAN bus immobiliser can also be compatible with a remote keyfob and tracker. (Brand dependent) This will give priority to the ghost system. This will give you extra security in the event that your vehicle is stolen or if keys are lost.

Contact us today to discuss how we can help protect your vehicle from key cloning and hacking. We offer our services throughout the UK, as well as at our installation center in Derby.

Service/Valet mode

Modern vehicles come with sophisticated stop/start eco systems that require just the correct inputs for proper functioning for example, battery voltage, engine temperature, external temperatures and what electrical systems are active. They can cause issues and it is difficult to determine if the issue is due to Ghost or not. This is especially relevant if your vehicle was recently repaired or valet-parked. If this is a problem you can go into the ghost service mode allowing the vehicle to start and drive without the need for a pin. This is helpful if your car's being maintained by an independent garage or valet-parked.

Press the button for service five times to enter service mode. The indicator light will flash twice when service mode is selected. You can leave this mode at any time by entering a PIN code. After you exited the service mode the Ghost immobiliser will resume normal operation.

This is a very discreet system that works by communicating with the vehicles ECU using the CAN data circuit, which connects directly to the original vehicle buttons & not using radio frequency signals like other immobilisers. This makes it nearly impossible for any other device to bypass or hack or even jamming devices that use spoof codes to mimic the original key fob are not a problem for the system.

It is a ghost immobiliser near me TASSA certified anti-theft system that meets the highest standards of protection. It also has an exclusive vehicle marking system that is linked to the international security register which is an insurance company requirement.

The ghost immobiliser has a extremely compact design and is easily hidden in your vehicles factory wiring, making it near impossible for thieves to locate. The unit that is sealed is so small that it can be placed in a variety of places around the car, such as under dashboards and on steering wheels.

The system uses existing buttons in your vehicle, like those on the steering wheel, door panels or centre console to let you create a an individual and revolving sequence of disarming that can be as long as 20 presses that must be completed to start your vehicle. It is able to be entered by anyone who has your pin code - it's secure and safe for you and your family, friends or work colleagues to use.

Leave a Reply

Your email address will not be published. Required fields are marked *